Taking a bath is one of the most relaxing things you can do in your free time. But if your bathtub isn’t clean, that relaxation can quickly turn into disgust. Nobody wants to get into a dirty bathtub, and mold and mildew can cause some severe health problems. So how can you keep your bathtub clean?
The answer is vinegar!
Many people don’t know that it is a great cleaning agent, and it can be used to clean a wide variety of surfaces.
Vinegar is a natural cleaning agent that will remove all the dirt, soap scum, grime, mold, and mildew build-up from your bathtub.
In this article, we will walk you through the exact method on how to clean bathtub with vinegar easily. So follow along and get ready to have a clean tub in your bathroom!
How Does Vinegar Clean a Dirty Bathtub?
We all know that vinegar cleans so well due to its acetic nature. But how? One of the main components of vinegar is acetic acid.
Due to this compound, it becomes acidic in nature. And its acidic nature is quite strong than lemon juice or coffee since it has a pH level of 2.4. Luckily, it’s less intense than the liquid inside batteries or our stomach juice!
However, due to this strong acidic nature, vinegar can clean all types of dirt, grime, grease, mold, and mildew and has become one of the most powerful cleaning products.
So, when you use it to clean bathtubs, all the dirt, stain, soap scum, mold, and mildew will be easily removed. Not only that, but it will also disinfect your tub as it has antibacterial properties too.
As a result, by using vinegar, you can clean your bathtub very easily without any hassle and keep it as clean as new!
Now that you know how vinegar cleans so well let’s move on to the next section, where we’ll show you the step-by-step method to use it. So, without further ado, let’s get started! [source]
How to Clean Bathtub with Vinegar (Step by Step)
Cleaning bathtub with vinegar is very easy. But you need to follow some steps to do it correctly. Here are the steps on how to clean bathtub:
Supplies You’ll Need
- Distilled White Vinegar
- Warm Water
- Spray Bottle
- Scrubber or Sponge
- Hydrogen Peroxide
- Baking Soda
- Clean Cloth
- Small Bowl
- Rubber Gloves
Step-1: Spraying
The very first step is to wear rubber gloves on your hands. Then mix warm water with white vinegar in a proportion of one to one and simply fill a clean spray bottle with it. If your bathtub is too dirty or you want to deep clean it, you can use more vinegar. Besides, you can add a few drops of essential oil to the mixture to avoid any pungent smell.
After that, spray the solution all over the surface of your tub. It would help if you were generous while spraying, as you have to ensure that the entire surface is covered with the solution.
Now, you have to wait for at least 15 minutes so that the cleaners can work on the stains. It will help to loosen the grime and dirt built upon the tub’s surface.
During this time, you can do some other work or take a rest. But make sure not to forget about your bathtub!
Step-2: Scrubbing
Now, use a gentle sponge and start scrubbing vigorously. You can also use an old brush to scrub the entire surface of the tub. But avoid using any harsh or steel wool scrubber. Make sure to reach all the nooks and crannies.
It is the most time-consuming stage of cleaning a bathtub with vinegar. But it is essential to do some elbow grease so that all the dirt and grime are removed completely.
Step-3: Rinsing
Once you are done scrubbing, rinse the tub with clean water. You can use a shower head for this purpose.
The last step is to wipe the tub dry with a clean towel. Make sure to remove all the moisture from the surface of the tub.
Step-4: Cleaning Showerheads
If the showerheads are very dirty and greasy, you may need to follow this stage. Otherwise not.
Take one part baking soda and one part vinegar to make a solution. Now, grab a plastic bag and pour the solution into the bag. After that, remove the showerhead, submerge it in the solution and sit overnight.
The next day, take an old brush and scrub the showerhead to remove the dirt.
Finally, rinse it with plain water and wipe the surface using a clean, soft cloth or paper towels to dry it. You can also take the help of Scrubbing Bubbles shower cleaning products.
Step-5: Removing Stubborn Stains
This stage is only applicable if you want to remove stains that are really stubborn. For this, take a generous amount of hydrogen peroxide in a bowl and soak a clean cloth into it.
Now, place the cloth over the stain and allow it to sit there for at least one hour. After that, use an old toothbrush to remove the stubborn stains and then wash it with dish soap and plain water.
Finally, use a clean microfiber cloth to dry the tub. And that’s it! You have successfully cleaned your bathtub with vinegar.
Now, enjoy your bath in a clean and sparkling tub! These are the simple steps you need to follow to clean bathtub with vinegar easily.
Important
Do not use vinegar if your bathtub is made of marble or other soft stone, as it may damage the surface.
Also, do not use this agent if you have just installed a new bathtub as it may damage the finish. In such cases, consult a professional to clean your tub. And always avoid abrasive cleaners for your fiberglass tub to prevent damage.
Frequently Asked Questions
Will baking soda scratch a bathtub?
Baking soda is sometimes helpful for cleaning tough stains from your bathtub along with vinegar. But it is an abrasive cleaner and can scratch your bathtub if you let it set on the tub for a long time or scrub it with a harsh sponge.
However, it will not scratch the tub’s surface if you can use it carefully and don’t scrub so hard. And always be careful while cleaning fiberglass tubs as they get scratches easily.
Can you use vinegar to clean bathtub drain?
Yes, you can. You need to pour half a cup of baking soda down the drain, followed by half a cup of vinegar.
Now, allow it to sit there for at least 15 minutes before flushing with hot water. Vinegar is an acidic liquid that can eat away the dirt, grime, and soap scum—making it perfect for cleaning your bathtub.
But because it is acidic, it’s essential to flush the area with hot water afterward to neutralize the acid.
How often should you clean bathtub?
You should clean your bathtub at least once a week to prevent dirt, grime, and soap scum from building up on the surface. If you have kids or pets at home, you may need to clean it more often.
Cleaning your bathtub is essential for both hygiene and aesthetic reasons. A dirty tub can be unsightly, and it can also harbor bacteria that can lead to illness. By taking the time to clean your tub regularly, you’ll be able to keep it looking its best and keep yourself healthy.
What kind of vinegar is best for cleaning?
White distilled vinegar is always best for cleaning because it’s less acidic than other types. This means it won’t damage surfaces like stone or tile.
That’s why it cleans stained tiles so well. It will also be less likely to leave behind a strong vinegar smell.
If you can’t find white distilled vinegar, you can use apple cider or white wine vinegar instead. Just be aware that these kinds of vinegar are more acidic and may damage some surfaces. They will also leave behind a more pungent vinegar smell.
Wrap Up
So, this is the wrap of the detailed method on how to clean a bathtub with vinegar easily. It is really an easy and effective way to keep your tub clean and maybe one of the best tips.
Follow the steps mentioned above carefully and always wash the tub well after scrubbing. And try to clean it regularly so that your tub always looks sparkling clean!
Hope that this article can be helpful for you to keep tubs clean all the time. Don’t forget to share it with your friends and family!
Related Content: