The dual fittings and attractive appearance of Hampton Bay ceiling fans are the unique features that make them so demanding. It’s a particular style of fan that includes a light fixture, making them ideal for use as indoor accents.
Also, these fans are renowned for being simple to assemble and install. In comparison to a standard fan, they are typically a little heavier and have different wiring. The fans are available in a huge selection of designs and hues.
The flush mount fan has an elegant appearance because it is near the ceiling. But these fans might seem pretty old at this stage, though you can remove them to install the latest models of ceiling fans in your home.
So, how do you take down a Hampton Bay ceiling fan? In this article Hampton Bay Ceiling Fan Removal, we are going to discuss the separation process of such fans with step-by-step instructions.
So let’s do this!
Is It Hard to Remove Hampton Bay Ceiling Fan?
Generally, Hampton fans are a bit heavy than the usual ones. Compared to general ceiling fans, these fans are installed with their screws concealed. Also, it carries a different system than a normal ceiling fan. An extra blue wire is found here, which might make you confused about the wiring.
No need to worry, though. I’ll go over the basics of Hamptons and how you do the disposal very easily.
Know About Hampton Bay Ceiling Fan
The first question that you might be thinking is, who makes Hampton Bay ceiling fans?” Well, it is Home Depot that uses the term Hampton Bay as a brand.
Home Depot is a trustworthy decor that uses the highest-quality materials and comes in a variety of patterns that can transform a dull, empty house into a lived-in-family like home.
And although Home Depot is a large business with a wide range of goods, none of their ceiling fans are actually made by them. Instead, they hire other businesses to do the manufacturing. This is a standard strategy in the retail industry that enables Home Depot to maintain low prices while yet providing a large range of products.
Some of the common Hampton Bay Ceiling Fan Parts are:
- Hampton Bay Ceiling Fan Remote
- Hampton Bay Ceiling Fan Blades
- Hampton Bay Replacement Glass Globe
- Fan motor
- Hampton Bay Compatible Capacitor
Easy Steps to Remove Hampton Bay Ceiling Fan
Here I’ll be instructing about two variants of the Hampton Bay ceiling fans- Downrod and flush mounted. Both of the fans have different structures, so you need to unmount them accordingly.
So without any further ado, let’s get started.
Tools & Materials You’ll Need
- Flathead screw drive
- Philips screwdriver
- Philips driver bit
- Drill
- Circuit tester
- Step ladder
- Electrical tape
Turn Off Power
Disconnect the fan’s power source by tripping the circuit breaker. If the fan is connected to a wall switch, turn off the wall switch as well. It is going to be an added safety measure. To reach the top of the unit, place a step stool underneath the ceiling fan.
Read Also: How to Turn on Ceiling Fan without Remote
Remove the Globes or Cover and Bulbs
If your apartment has a light fixture, take out the globes and bulbs. Usually, the light fixtures with four open globes are fastened to the fixture with three screws that go through the metal collar holding the globe’s base.
Remove the globes manually by turning the screws counterclockwise.
Use a Phillips-head screwdriver to the three screws holding the light fixture to the fan to loosen them. When you can see the wires, gently lower the body of the light fixture by rotating it counterclockwise. Remove the wire caps holding the ceiling fan’s wires to the light fixture, then move the light fixture out of the way.
Remove Fan Blade
You may easily remove the blade from the blade arms by sliding a flathead screwdriver under the plastic band. The plastic band is attached to the blade’s bottom.
And to allow the screws to fit into the bigger opening of the blade arm’s keyhole, push back the blade’s arms. You may eventually lift the blade off once you have inserted it. You could have removed the blade arms later, but taking them off first will make it lighter and you can then easily lift the entire fan.
Downrod Fan
Downrod mounted ceiling fan hangs away from the ceiling at the end of the middle downrod. Let’s learn about the unmounting procedure of these fans.
Use Screwdriver to Remove Fan’s Canopy
In the case of a downrod fan, use a Phillips screwdriver to remove the fan’s canopy. Some canopies have decorative rings concealing the screws and you should remove them first.
Use Voltage Tester
You can now reach the fan’s wiring after removing the canopy. Hold the tester against the wiring after removing it from the electrical box where you can see the wires assembled. Be sure there is no current running through the cables before attempting to remove the fan.
Remove Wire Nuts and Attach Wires
Locate the wires that connect the fan to the ceiling wires and from there, remove the wire nuts and detach the wires using your hand.
Use Nuts or Black Tape
Once the wire nuts have been taken off and the wires have been separated, recover the ceiling wires with wire nuts in your free hand. You can also use black electrical tape.
Remove the Fan
While supporting the fan, slide the bowl at the end of the downrod out of the mounting bracket and lower it to the ground. If it is too heavy for you then take someone’s help to lower it to the ground. Then set it in a safe place.
Remove Flush Mount Fan
A flash-mounted ceiling fan sits with a flash in the ceiling. They are different in look and structure than the downrods.
Now we will be learning the removal process of them.
Remove Canopy
Look for the three or four screws holding the canopy cover over the ceiling fan motor housing in place. Using the screwdriver, loosen and pull out the screws. With the housing in mind, lower the canopy.
Disconnect Wires
Using a wrench, remove the nuts holding the housing to the stud of the mounting bracket. Drop the housing and fasten one side to the mounting bracket’s hook.
To connect the housing cables to the ceiling fan motor wires, counterclockwise-turn the plastic wire caps. Prior to connecting the wires to another fixture, separate the wires and twist the caps onto each individual house wire.
Remove Mounting Bracket
Use a screwdriver to detach the screws and remove the mounting bracket.
How to Remove Hampton Bay Ceiling Fan No Screws?
We have already discussed the downrod and flush-mounted ceiling fans, where you had to remove the screws of the ceiling bracket. But what if you see there are no screws in the fan?
The various kinds of Hampton Bay ceiling fans need various types of ceiling attachments. Others don’t have screws, while some do. Depending on whether one has screws or not, there are different procedures to remove these fans.
Use the following methods described to take down the ceiling fan without screws.
Turn the Breaker Off
Start by flipping the breaker and turning the power of the fan off.
I would recommend using a voltage tester to make sure there is no power running through.
Remove the Blades
Remove the blades from the fan and one by one, remove the blades. The fan will be simpler to control and the room will stay dust-free if you do this. It is difficult to completely remove dust, and it does gather over time.
Remove the Ring
You’ll notice a covering ring mounted on the ceiling of a fan that doesn’t have any screws. You need to remove the ring. Rotate the ring by about 1 inch in a clockwise direction.
Slide the canopy down to reveal the screws connecting it to the roof mount.
Give it a back-and-forth motion to loosen it and provide room for it to slide off. This is because often the screws can be challenging to remove. Everything gets simple as the ring slides off, you can then remove the fan quite effortlessly.
Remove the Canopy and Fan
It is the canopy that hides the screws. Detach any form of wire connections from the fan and ceiling using a screwdriver, then you can remove the fan from the ceiling.
Warning
Don’t forget to inspect the line and neutral wires from the ceiling that are covered inside the junction box to ensure that they don’t pose any risks. Besides, always tighten the screws using a wrench.
A fan with a light fixture and its wiring system differs from a typical ceiling fan. Here, there is an additional blue wire. The blue cable on the ceiling fan can cause you confusion. In reality, the wire is the line wire for the light that is included with the fan.
Frequently Asked Questions (FAQs)
Q: How do I Know What Kind of Ceiling Fan I have?
The product number on a Hampton Bay ceiling fan is typically located on a silver label on top of the motor housing. The label on your motor housing could be difficult to read if you don’t have your package or instructions.
You can try to take a picture of the label using a mirror or your smartphone.
Q: How do I Reset My Hampton Bay Ceiling Fan?
You must hold down the fan off button for 10 seconds after first shutting off the power and then turning it back on after 30 seconds.
It will reset everything you have done previously. If that didn’t work, you might need to synchronize the fan’s sensor with the remote control.
Q: Do Hampton Bay Ceiling Fans Need to be Oiled?
The ceiling fans from Hampton Bay are durable. They aid in cooling the space in the summer and may be turned around in the winter to force warm air that rises to the ceiling back into your living area.
Nonetheless, the fan’s bearings may require some cleaning and lubrication after regular use for extended periods of time. To oil the fan, you need to follow these steps-
- Put oil cleaner into the “oil” hole in the fan motor, which is located at the top. Using the spray attachment, spray the lubricant into the oil hole for three counts. Allow the cleaner two hours to begin working.
- Lubricate the motor of the fan. Remove the old oil and clean thoroughly. Then add 1 oz. of 10-weight motor oil to the oil reserve.
- To ensure that the motor oil gets all the way down, manually rotate the fan blades for three to four revolutions.
Q: Can You Use WD 40 on a Ceiling Fan?
Because WD-40 is a poor lubricant, it is not recommended to use it to lubricate a ceiling fan. WD-40 functions primarily as a solvent and rust remover. It should temporarily limit the noise if you apply it to a ceiling fan, but it will quickly dry up and cause other serious issues.
Wrap Up
The article Is enough to direct you on how to remove your Hampton Bay ceiling fan from its mounting. It has all the information you require about it. Just be mindful of safety and finish the job.
Thus, if you have a Hampton Bay ceiling fan and want to remove it, just read the post whenever you need to know what to do. I hope you find our conversation to be very helpful. All the best!
Related Content: